Top 10 tips for your Tyres safety

Do you know that the failure to attend tyre safety is an important factor in thousands of road accidents every year? Well, according to the research by CSIR, it indicates that nearly 20% of accidents are due to tyre failures.

It is very important to ensure that your tyres are in good condition. They not only reduce the risk of accidents but also saves a considerable amount of time, effort and money.

A well selected and maintained tyres can contribute greatly to your safety, increase fuel efficiency, and gives better handling and stopping in all road conditions. They provide greater comfort and better ride quality.

This blog discusses the 10 best tips to ensure your tyre safety. These tips will help you to maximise the longevity of your tyres. Besides that, they can help you to raise fuel efficiency and improve your driving experience. Most importantly, they look after the overall road safety,

1. Choose Your Tyres Carefully: A tyre must not be purchased based merely on appearance and initial price. Along with them, the size recommended for the vehicle and its load recommendations must also be kept in mind. Considering your typical driving patterns and the places you are likely to drive in, you can also approach a knowledgeable automobile expert. Or you can also visit Apollo Tyres, Kenda Tyres, online to have a better understanding.
2. Buy a tyre gauge and keep it handy: You must keep the gauge handy in your car every time. It alerts you when you need to inflate your tyres. They are readily available at any automotive retailer or supply store.
3. Check your tyre pressure regularly. Underinflation is a potent threat to your tyre safety as it can lead to tyre failure. Similarly, overinflation can cause handling and stopping problems. Consider the manufacturer’s recommended air pressure listed on your door jamb or use owner’s manual. Check your tyre pressure when the vehicle is cool as a heated vehicle can give incorrect readings.
4. Drive slowly during wet weather: If you lower the vehicle’s speed, the tyre footprint increases which leads to better traction. Slowing down also reduces the risk of hydroplaning when you drive into the water puddled on the road.
5. Keep a check on your tyre tread: It is highly imperative to inspect and measure your tyre tread. This can be done by placing a penny in the tread groove. In case, you see the top of Lincoln’s head, it indicates the need for a tyre replacement.
6. Check the tyre sidewalls: You must regularly check your tyre sidewalls so ensure that they are no cuts, bulges or gouges. These irregularities can threaten your tyre safety and hamper your driving experience.
7. Rotate your tyres every 6,000 kms: It is like a periodical check-up to ensure your tyre safety. if you find any uneven wear, approach your service professional to correct any misalignment, imbalance, or any other mechanical problem involved prior to the rotation process.
8. Keep a check on your tyre balance: You must do a periodical check-up of your tyre balance. Unbalanced tyres and wheel assembly may lead to irregular wear and may lead to accidents.
9. Keep in mind that you don’t overload your vehicle: This can put excessive pressure on the tyre and can lead to tyre failure. It can also create excessive heat inside the vehicle. You must follow the manufacturer’s load recommendation to avoid this problem.
10. Check your vehicle’s alignment: If your vehicle is pulling to one side, then the vehicle alignment is faulty and it can damage your tyre. You must approach your professional service provider immediately if that’s the case and get it corrected.

Conclusion:

Hence, before you hit the road, it is necessary to give 10 minutes to inspect the condition of your tyres. Examining tyre tread, pressure and sidewalls and also managing the load, can better your driving experience and ensure your tyre safety.